✨ UNLOCK THE SECRET TO PERFECT GAUGE! →

Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments

*This post may contain affiliate links to support the cost of this blog. At no cost to you, I may make a small commission if you purchase through these links. Read our Privacy Policy HERE

Few handmade holiday treasures catch the warm glow of Christmas tree lights quite like delicate white crochet thread lace stretched over shimmering golden satin baubles. These Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments feature two heirloom motif variations—a sculpted Cluster Stitch Spoke Ornament built from triple-treble clusters and picot arches, and a botanical Daisy Chain Spoke Ornament adorned with five-loop chain blossoms along each vertical rib. Worked with a single ball of Size 10 mercerized white cotton crochet thread and a 1.5 mm (US Steel Size 7) hook, each six-spoke lace jacket is shaped over a reusable 3-inch form and tied with a metallic silver ribbon bow around a 3-inch golden satin Christmas ball.

Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments in snow-white size 10 cotton thread over 3-inch golden satin Christmas baubles with silver ribbon bows
Two heirloom 3-inch golden satin Christmas ball ornaments wrapped in six-spoke snow-white Size 10 thread crochet lace—featuring the Cluster Stitch Spoke design and Daisy Chain Spoke design topped with metallic silver bows.

Because each lace cover is crocheted flat in just two rounds—a foundation ring followed by an continuous six-spoke round—you can stitch an entire matching set of vintage tree ornaments from a single 400-yard ball of Size 10 thread. Blocking the dampened cotton spokes with fabric stiffener over a plastic-wrapped 3-inch Styrofoam ball gives the lace a crisp, permanent spherical curve before you slip the finished cage onto your satin ornament ball.

Pattern Overview

  • Skill Level: Experienced / Intermediate Thread Crochet (multi-yarn-over triple treble clusters, chain-loop daisies, and 3D spherical blocking)
  • Finished Measurements: Each finished ornament measures approximately 3 inches (7.5 cm) in diameter
  • Gauge: Each 2-round, 6-spoke lace motif fits snugly around a standard 3-inch (7.5 cm) diameter ornament ball
  • Construction Method: Two-round radial construction (center ring + 6-spoke lace round) molded with fabric stiffener over a 3-inch Styrofoam ball and tied at the top over a 3-inch golden satin bauble
  • Recommended Hook: 1.5 mm (US Steel Size 7) crochet hook (or size needed to fit a 3-inch ball)
  • Thread Weight: Size 10 Classic Mercerized Cotton Crochet Thread in White
1Home2Seasonal & Holiday Crochet3Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments

Original Festive Ornament Materials & Color Palette

To recreate the timeless contrast shown on the tree, snow-white cotton lace is paired with warm metallic gold satin baubles and silver ribbon bows:

  • Lace Thread — White (0001) Size 10 Mercerized Cotton: Crisp snow-white thread highlights every picot point, daisy petal, and triple-treble cluster spoke against the ornament surface.
  • Ornament Core — 3-Inch Golden Satin Christmas Balls: Smooth spun-satin gold balls glow through the open spaces between the six vertical lace spokes.
  • Top Ribbon Trim — 7/8-Inch Metallic Silver Ribbon: Gathers the six spoke tips at the crown of the ornament beneath a classic bow and metal ornament hook.

Materials & Tools Needed

  • Size 10 Mercerized Cotton Crochet Thread (400 yds / 365 m per white ball):
    • White (0001): 1 ball (1 ball is sufficient to crochet 10 to 12 complete ornament covers!)
  • Steel Crochet Hook: 1.5 mm (US Steel Hook Size 7)
  • Ornament & Blocking Supplies:
    • 3-Inch (7.5 cm) Golden Satin Christmas Balls: 1 satin ball per finished ornament
    • 3-Inch (7.5 cm) Styrofoam Ball & Plastic Wrap: 1 reusable Styrofoam ball wrapped in kitchen plastic wrap for stiffening and molding the lace covers
    • Liquid Fabric Stiffener: For shaping the cotton spokes into a rigid 3D sphere
    • Ribbon & Hardware: 7/8-inch (2.2 cm) wide metallic silver ribbon, metal ornament hangers, fine-eye thread needle, and sharp embroidery scissors
White size 10 crochet thread ball, 1.5mm steel crochet hook, 3-inch golden satin Christmas ornaments, silver ribbon, and scissors
Gather Size 10 white mercerized cotton crochet thread, a 1.5 mm (US Size 7) steel hook, 3-inch golden satin Christmas balls, metallic silver ribbon, and blocking supplies.

Ornament Variations & Spoke Architecture Table

Both ornament styles are engineered around 6 evenly spaced vertical spokes that wrap from the bottom pole of the 3-inch sphere up to the top hanger:

Ornament Design Center Ring Base (Round 1) Vertical Spoke Structure (Round 2) Finished Fit
Design 1: Cluster Stitch Ornament Ch 36 ring + 36 sc base 6 spokes of 3-trtr-Cl, 4-trtr-Cl, 10-yo long trtr & ch-6 picots Fits 3″ (7.5 cm) golden satin ball
Design 2: Daisy Chain Ornament Ch 2 + 6 sc center ring 6 spokes of 3-dc bases, 25-ch stems & pairs of 5-loop chain daisies Fits 3″ (7.5 cm) golden satin ball

Stitch Abbreviations & Special Lace Stitches (US Terms)

All instructions use standard US crochet terms:

  • ch: chain(s)
  • dc: double crochet
  • sc: single crochet
  • sl st: slip stitch
  • st(s): stitch(es)
  • trtr: triple treble crochet (see Special Stitches below)
  • 3-trtr-Cl: 3-triple-treble cluster (see Special Stitches below)
  • 4-trtr-Cl: 4-triple-treble cluster (see Special Stitches below)
  • incomplete-3-trtr-Cl: incomplete 3-triple-treble cluster (see Special Stitches below)
  • daisy: 5-petal chain loop daisy motif (see Special Stitches below)
  • ( … ): work directions in parentheses into the same stitch
  • [ … ]: work directions in brackets the number of times specified

Special Thread Lace Stitches (Step-by-Step)

Triple Treble Crochet (trtr): [Yarn over] 4 times, insert hook in indicated stitch and draw up a loop, [yarn over and draw through 2 loops on hook] 5 times.

3-Triple-Treble Cluster (3-trtr-Cl): [Yarn over] 4 times, insert hook in indicated stitch and draw up a loop, [yarn over and draw through 2 loops on hook] 4 times (2 loops remain on hook); repeat [yarn over 4 times, insert hook in same stitch and draw up a loop, (yarn over and draw through 2 loops) 4 times] 2 more times (4 loops now remain on hook); yarn over and draw through all 4 loops on hook.

4-Triple-Treble Cluster (4-trtr-Cl): [Yarn over] 4 times, insert hook in indicated stitch and draw up a loop, [yarn over and draw through 2 loops on hook] 4 times (2 loops remain on hook); repeat [yarn over 4 times, insert hook in same stitch and draw up a loop, (yarn over and draw through 2 loops) 4 times] 3 more times (5 loops now remain on hook); yarn over and draw through all 5 loops on hook.

Incomplete 3-Triple-Treble Cluster (incomplete-3-trtr-Cl): [Yarn over] 4 times, insert hook in indicated stitch and draw up a loop, [yarn over and draw through 2 loops on hook] 4 times (2 loops remain on hook); repeat [yarn over 4 times, insert hook in same stitch and draw up a loop, (yarn over and draw through 2 loops) 4 times] 2 more times (4 loops remain on hook)—do not yarn over and do not complete the cluster; leave the loops on the hook for the next step.

5-Loop Chain Daisy (daisy): Ch 14, sl st in 14th ch from hook (first outer petal made); ch 12, sl st in 12th ch from hook (second petal made); ch 8, sl st in 8th ch from hook (center short petal made); ch 12, sl st in 12th ch from hook (fourth petal made); ch 14, sl st in 14th ch from hook (fifth petal made); sl st in the same ch as the first sl st to close the daisy base.

Step-by-Step Crochet Lacy Christmas Ornaments Instructions

Step 1: Crocheting Design 1 — The Cluster Stitch Spoke Ornament

This ornate medallion begins with a 36-single-crochet base ring that sits at the bottom of the ornament ball, then builds 6 interconnected diamond-cluster spokes that reach up to the top crown.

Crocheting the white size 10 cotton thread cluster stitch spokes with a 1.5mm steel crochet hook
Working Round 2 of the Cluster Stitch Ornament in white Size 10 cotton thread using a 1.5 mm steel hook.

Cluster Stitch Ornament Instructions

With White Size 10 thread and your 1.5 mm steel hook, ch 36; join with a sl st in the first ch to form a ring.

Round 1 (Base Ring): Ch 1, work 1 sc in the same ch as join and 1 sc in each remaining ch around; join with a sl st in first sc. (36 sc)

Round 2 (6-Spoke Lace Round): Work the following complete spoke sequence 6 times around the 36-sc ring:

• Begin spoke: Ch 6, work 3-trtr-Cl in the same st as the last sl st made, ch 10.

• Extended cluster stem: [Yarn over] 6 times (7 loops on hook), work 4-trtr-Cl in the same st, then [yarn over and draw through 2 loops on hook] 6 times (1 loop remains on hook).

• First picot & upper compound diamond: Ch 6, sl st in 6th ch from hook (picot made), ch 17, work incomplete-3-trtr-Cl in 7th ch from hook (4 loops on hook); next, [yarn over] 10 times (14 loops on hook), insert hook in base of picot and draw up a loop (15 loops on hook), [yarn over and draw through 2 loops on hook] 10 times (long trtr made — 5 loops remain on hook); now work incomplete-3-trtr-Cl in the 6th bar of that long trtr (8 loops on hook), yarn over and draw through all 8 loops on hook to close the compound diamond!

• Top crown loops (for tying at top of ornament): Work [ch 4, sc in 2nd ch from hook and in next 2 ch] twice.

• Return side of spoke: Work (sl st, ch 6, 3-trtr-Cl) in top of the last cluster made, ch 10, sl st in base of picot, ch 6, sl st in 6th ch from hook (picot made), ch 10, work (3-trtr-Cl, ch 6, sl st) in the same sc of Round 1 as the first 2 clusters (1 full spoke completed).

• Advance to next spoke: Work 1 sl st in each of the next 6 sc of the Round 1 ring.

Repeat the entire spoke sequence 5 more times around the ring, then join with a sl st in the same st as the first cluster. Fasten off and weave in ends. (6 cluster spokes completed)

Step 2: Crocheting Design 2 — The Daisy Chain Spoke Ornament

The second ornament design starts with a compact 6-single-crochet ring and radiates 6 single-crochet-backed spokes, each flanked by two five-petal chain daisies.

Crocheting the six-spoke daisy chain lace ornament cover beside a 3-inch golden satin Christmas bauble
Crocheting the six-spoke Daisy Chain Ornament motif in white Size 10 cotton thread before stiffening and molding over the 3-inch sphere.

Daisy Chain Ornament Instructions

Round 1 (Center Ring): With White Size 10 thread and your 1.5 mm steel hook, ch 2. Work 6 sc in the 2nd ch from hook; join with a sl st in first sc. (6 sc)

Round 2 (6-Spoke Daisy Round): Ch 3 (counts as first dc), work 2 dc in the same sc as join. Now work the 6-spoke repeat around:

Repeat [ch 15, make daisy (ch 14, sl st in 14th ch, ch 12, sl st in 12th ch, ch 8, sl st in 8th ch, ch 12, sl st in 12th ch, ch 14, sl st in 14th ch, sl st in same ch as first sl st), ch 25, work 1 sc in 11th ch from hook (leaving a 10-ch top loop) and 1 sc in each of the next 14 ch down the stem, make daisy, work 1 sc in each of the last 15 ch back to the center ring (spoke completed), work 3 dc in next sc of Round 1] 6 times around, omitting the final 3 dc in next sc on the 6th repeat; join with a sl st in top of beginning ch-3. Fasten off and weave in ends. (6 daisy spokes and six 3-dc groups)

Step 3: Stiffening on a 3-Inch Form, Inserting the Satin Ball & Ribbon Bow

Both ornament covers use the exact same stiffening and assembly method so the white lace holds its sculpted cage shape around the golden satin Christmas bauble.

Tying the stiffened white crochet lace spokes around the 3-inch golden satin Christmas ball ornament with a metallic silver ribbon bow
Inserting the 3-inch golden satin Christmas ball inside the stiffened six-spoke lace cover and tying the crown with a 7/8-inch metallic silver ribbon bow.

Stiffening, Molding & Final Assembly (All Ornaments)

1. Prepare the Reusable Forming Ball: Wrap your 3-inch (7.5 cm) Styrofoam ball smoothly in kitchen plastic wrap so the stiffened cotton thread will release cleanly once dry.

2. Saturate & Shape the Lace: Dip the completed crochet piece in liquid fabric stiffener, gently squeeze out any excess liquid between paper towels, and center the Round 1 ring at the bottom pole of the plastic-wrapped Styrofoam ball. Smooth the 6 spokes evenly up the sides of the ball, opening out each picot, cluster, or 5-loop daisy petal with rust-proof pins if desired. Allow to dry completely until rigid.

3. Insert Satin Ball & Tie Crown: Once dry, gently flex the top spoke tips open, slide out the plastic-wrapped Styrofoam ball (which you can reuse for your next ornament!), and slip a 3-inch golden satin Christmas ball inside the rigid lace cage. Use matching white thread to tie or tack the 6 top spoke loops together around the neck of the ornament cap. Finish by tying a 7/8-inch metallic silver ribbon bow at the top and attaching a metal ornament hanger.

Heirloom Display & Color Customization Ideas

  • Jewel-Tone Satin Bauble Contrasts: In addition to classic spun-gold satin balls, snow-white Size 10 lace looks breathtaking over ruby crimson, sapphire blue, or emerald green satin balls.
  • Subtle Pearl or Seed Bead Accents: Before stiffening the Daisy Chain Ornament, stitch a single 3 mm gold or silver glass seed bead right in the center of each 5-loop chain daisy.

Care & Post-Holiday Ornament Storage

  • Spot Cleaning: Do not machine wash stiffened ornaments, as water will dissolve the fabric stiffener. Dust lightly with a soft dry brush before packing away.
  • Storage: Store each ornament in a divided holiday ornament box lined with acid-free tissue paper so the stiffened picots and daisy petals stay crisp year after year.
✨ PATTERN HELP & TIPS ✨
Got Questions?

Frequently Asked Questions (FAQ)

Click on any question below to reveal the answer

QWhy do we shape the wet lace on a Styrofoam ball instead of directly on the satin ornament?

Liquid fabric stiffener can spot or dull delicate spun-satin ornament balls while drying, and a Styrofoam ball lets you pin out the picots and daisy loops directly into the foam! Once the cotton lace dries into a rigid hemisphere cage, it pops right off the plastic-wrapped Styrofoam ball and cradles the pristine satin ball without getting a drop of stiffener on the satin.

QHow do I keep 10 yarn-overs neat on the long triple treble stitch in Design 1?

Wrap the thread snugly (but not tightly) around the shaft of your 1.5 mm steel hook and place your right index finger over the wraps to hold them in place as you insert the hook into the base of the picot. Work through the loops two at a time with steady tension.

QHow many ornaments can I make from one ball of Aunt Lydia’s Size 10 thread?

Each 3-inch ornament cover uses only about 30 to 35 yards of Size 10 thread, so a single 400-yard ball of White thread is enough to crochet a full dozen heirloom ornaments for your tree or holiday gift boxes!

QWhat can I use if I don’t have commercial liquid fabric stiffener on hand?

You can mix a classic 1:1 solution of white craft glue (PVA glue) and warm water, or a traditional boiled cornstarch-and-water solution, both of which dry completely clear on white mercerized cotton thread.

Save These Lacy Thread Crochet Christmas Ornaments on Pinterest

Love vintage thread crochet holiday heirlooms? Pin either of the vertical reference cards below to your Seasonal & Holiday Crochet board so you have both the Cluster Stitch and Daisy Chain ornament patterns ready for Christmas crafting.

Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments Pinterest reference pin 1
Pin this vertical holiday crochet guide to save both lacy thread Christmas ball ornament patterns.
Lacy Six-Spoke Thread Crochet Christmas Ball Ornaments step-by-step collage pin 2
Save the step-by-step six-spoke thread crochet ornament tutorial to your holiday crochet board.
Tiered Scallop Shell Ruffle Crochet Christmas Tree Skirt
PREVIOUS PATTERN

Tiered Scallop Shell Ruffle Crochet Christmas Tree Skirt

NEXT PATTERN

Six-Point Cluster Picot Crochet Christmas Snowflake Dishcloth

Six-Point Cluster Picot Crochet Christmas Snowflake Dishcloth
✨ KEEP CROCHETING ✨
You May Also Love

SIMILAR CROCHET PATTERNS

✨ MAKER COMMUNITY ✨
Share Your Thoughts

LEAVE A COMMENT

Have a question about a stitch or want to share how your project turned out? Drop a comment below — I read and reply to every maker!